Hi Florian,

When I run SARAH 4.12.1 (and some versions before), Mathematica 7.0 shows the following messages:
################################################################################
Syntax::newl: The newline character after
"If[AuxGaugesPresent===True,Gauge=Join[Gauge,AuxGauge];]"
is understood as a multiplication operator. (line 1281 of "init`")

Syntax::newl: The newline character after "]" is understood as a multiplication operator.
(line 988 of "SPheno2LPole`")

Syntax::newl: The newline character after " OutputName -> ZAC (*,"
is understood as a multiplication operator.
(line 808 of
"C:\Users\Laptop\Desktop\Everythingwork\SARAH\SARAH-4.12.1\Models\parameters.m")
################################################################################
Should I care about them?





Since SARAH 4.12.1, If I use "MakeSPheno[]" for SM model, I will get some errors as follows:
################################################################################
Writing SPheno two loop diagrammatic Higgs mass

by Mark Goodsell (goodsell@lpthe.jussieu.fr), arxiv:1503.03098

Generating tadpole diagrams

Extract::psl: Position specification {All,1,1} in Extract[{{{C[Ah,Ah,hh]},{CouplingAhAhhh,cplAhAhhh},{},{\[Lambda],v},-I v \[Lambda],{Ah,Ah,hh}},{{C[hh,hh,hh]},{Couplinghhhhhh,cplhhhhhh},{},{\[Lambda],v},-3 I v \[Lambda],{hh,hh,hh}},<<13>>,{{C[Fu,VG,bar[Fu]]},{CouplingcFuFuVG,cplcFuFuVGL,cplcFuFuVGR},{gt1,gt2},{g3},-I g3 Delta[gt1,gt2],-I g3 Delta[gt1,gt2],{bar[Fu[{gt1,ct1}]],Fu[{gt2,ct2}],VG[{ct3,lt3}]}}},{All,1,1}] is not an integer or a list of integers. >>

Complement::heads: Heads List and Extract at positions 2 and 1 are expected to be the same. >>

Extract::psl: Position specification {All,1,1} in Extract[{{{C[Ah,Ah,Ah,Ah]},{CouplingAhAhAhAh,cplAhAhAhAh},{},{\[Lambda]},-3 I \[Lambda],{Ah,Ah,Ah,Ah}},{{C[Ah,Ah,hh,hh]},{CouplingAhAhhhhh,cplAhAhhhhh},{},{\[Lambda]},-I \[Lambda],{Ah,Ah,hh,hh}},{<<1>>},{<<1>>},{{C[hh,hh,Hp,conj[Hp]]},<<4>>,{hh,hh,Hp,conj[Hp]}},{{C[Hp,Hp,conj[Hp],conj[Hp]]},{CouplingHpHpcHpcHp,cplHpHpcHpcHp},{},{\[Lambda]},-2 I \[Lambda],{Hp,Hp,conj[Hp],conj[Hp]}}},{All,1,1}] is not an integer or a list of integers. >>

Join::heads: Heads Complement and Extract at positions 1 and 2 are expected to be the same. >>

Extract::psl: Position specification {All,1,1} in Extract[{{{{Ah,Ah,hh}},{CouplingAhAhhh,cplAhAhhh},{},{\[Lambda],v},-I v \[Lambda],{Ah,Ah,hh}},{{{hh,hh,hh}},{Couplinghhhhhh,cplhhhhhh},{},{\[Lambda],v},-3 I v \[Lambda],{hh,hh,hh}},<<13>>,{{{Fu,VG,bar[Fu]}},{CouplingcFuFuVG,cplcFuFuVGL,cplcFuFuVGR},{gt1,gt2},{g3},-I g3 Delta[gt1,gt2],-I g3 Delta[gt1,gt2],{bar[Fu[{gt1,ct1}]],Fu[{gt2,ct2}],VG[{ct3,lt3}]}}},{All,1,1}] is not an integer or a list of integers. >>

General::stop: Further output of Extract::psl will be suppressed during this calculation. >>

Complement::heads: Heads List and Extract at positions 2 and 1 are expected to be the same. >>

Join::heads: Heads Complement and Extract at positions 1 and 2 are expected to be the same. >>

Complement::argm: Complement called with 0 arguments; 1 or more arguments are expected. >>

Extract::argtu: Extract called with 1 argument; 2 or 3 arguments are expected. >>

Extract::argt: Extract called with 0 arguments; 2 or 3 arguments are expected. >>

Extract::argtu: Extract called with 1 argument; 2 or 3 arguments are expected. >>

Extract::argtu: Extract called with 1 argument; 2 or 3 arguments are expected. >>

General::stop: Further output of Extract::argtu will be suppressed during this calculation. >>

Complement::argm: Complement called with 0 arguments; 1 or more arguments are expected. >>

Extract::argt: Extract called with 0 arguments; 2 or 3 arguments are expected. >>

Tadpole diagrams complete: -1 diagrams written to file.

Generating mass diagrams for hh states

Complete: -1 diagrams written to file.

Generating mass diagrams for Ah states

Complete: -1 diagrams written to file.

Writing 1L Gaugeless tadpoles: 6 completed

Transpose::nmtx: The first two levels of the one-dimensional list {} cannot be transposed. >>

Writing Tadpoles: Completed (0 of 0) topologies

Writing CP-even masses: Completed (0 of 0) topologies

Writing CP-odd masses: Completed (0 of 0) topologies

Write loop masses

Getting needed information

Writing routine for all loop corrections

Writing one-loop tadpoles: 1/1(All Done)

Writing one-loop masses: 11/11(All Done)

Write tree-level decays

Writing two-body decay: 4/4(All Done)

Writing three-body decay: 3/3(All Done)

Writing Routines for 1-Loop Decays

Writing Counter-Terms for Couplings

writing routine for each coupling: 42/42 (All Done)

Writing loop decays for hh(4/4): 12/18({VP,VZ})

StringJoin::string: String expected at position 2 in Call hardradiationFFS(Mex1,Mex2,Mex3,MLambda,em,<>StringRiffle[{4._dp/9._dp,4._dp/9._dp,0,4._dp/9._dp,0,0},,]<>,CoupL,CoupR,Gammarealphoton(i1,i2),kont)
. >>

StringJoin::string: String expected at position 2 in Call hardradiationFFS(Mex1,Mex2,Mex3,MLambda,em,<>StringRiffle[{4._dp/9._dp,4._dp/9._dp,0,4._dp/9._dp,0,0},,]<>,CoupL,CoupR,Gammarealphoton(i1,i2),kont)
. >>

StringJoin::string: String expected at position 2 in Call hardradiationFFS(Mex1,Mex2,Mex3,MLambda,em,<>StringRiffle[{4._dp/9._dp,-2._dp/9._dp,2._dp/3._dp,1._dp/9._dp,-1._dp/3._dp,1._dp},,]<>,CoupL,CoupR,Gammarealphoton(i1,i2),kont)
. >>

General::stop: Further output of StringJoin::string will be suppressed during this calculation. >>
#####################################################################################
However, loop decays error for photon exists in prior versions since SARAH 4.11.0.


Regards,
Sam

PS: I have got above errors for the most models in SARAH as far as I have checked.

Hi
I haven't checked with Mathematica 7 since a long time. At the moment, we only try to be compatible with 10 and 11, but can't promise a support of older versions. Can you try with a more recent version?

Cheers
Florian

Hi,

I will check it out and post the result here.
Thank you for support.


Best,
Sam

Dear Florian,

It works correctly with Mathematica 11.1.1.

Thanks a lot.


Regards,
Sam